Is Your iPhone XR Stuck on the Apple Logo? Here’s the Solution

There are a few things that can cause major system errors, like your iPhone XR being stuck on the Apple logo screen. One is a corrupt or damaged operating system. This can happen if the operating system files become corrupt or if they are damaged by a virus. Another possibility is hardware damage.

This can occur if the phone is dropped or if it sustains any other type of physical damage. If either of these things happens, it can cause the phone to act up and stop working properly.

In most cases, insufficient or low internal memory is to blame for symptoms that are similar to those caused by system errors. This can be due to a number of factors, including defective motherboards or busted screen components.

However, hardware issues are not always the cause, and other factors such as software errors can also lead to these problems.

You May Also Like:

iPhone X Not Sending Text Messages

How to Block No Caller ID on iPhone

How to Screenshot on iPhone 11

Screen Recording on iPhone 13

Common Issues with iPhone XR

Apple’s new high-end smartphones are encountering problems for a lot of reasons. We know it seems odd or unusual that a new device from Apple could encounter such issues, however there are a lot of factors that can trigger these issues.

The iPhone XR has been known to have some issues since its release. One of the more common problems is that the phone can sometimes unexpectedly turn off. This seems to be due to a battery issue, as the phone will often turn off when it is at a high temperature.

Another issue that some users have reported is that the phone’s screen becomes unresponsive in cold weather. – We hope you haven’t tried this šŸ™‚

iPhone XR Stuck on Apple Logo Solutions

Force Restart

There are a few different ways that you can reset your iPhone if it is frozen on the apple logo.

Force restarting an iPhone clears out minor software errors and rogue apps that may be causing the phone to freeze. This can be done by pressing and holding the Sleep/Wake button and the Home button at the same time for about 10 seconds, until the Apple logo appears on the screen.

Here is the step by step:

  1. Press and quickly release theĀ Volume Up button.
  2. Press and quickly release theĀ Volume Down button.
  3. Then, press and hold theĀ Power buttonĀ on the side of the phone and then release when the phone enters the start-up sequence.

Did that solve it? Great! (If not, let’s keep moving down the solutions list.)

Install Latest iOS Update

If your iPhone happened to get unfroze from the Apple logo issue from the force restart, you’ll want to check and install the latest iOS update if it’s available.

There are a few reasons why it’s important to update your iPhone. First, new updates usually include bug fixes and security patches. This means that if there are any vulnerabilities in your current version of iOS, they will likely be fixed in the latest update.

Additionally, new updates often include new features and improvements. So, by keeping your iPhone up-to-date, you’ll have access to the latest and greatest that Apple has to offer.

Finally, it’s just good practice to keep all of your software up-to-date. This way, you can be sure that you’re using the most secure and stable versions available.

To update iPhone XR software, first open the Settings app and go to General > Software Update.

If there is an update available, you will see a message that says “Your software is up to date” at the top of the screen. If an update is available, tap Download and Install to download and install the update.

The download and installation process will take a few minutes, and your iPhone will restart once the update is installed.

Reset All iPhone Settings

When you reset your iPhone XR settings, all of your personalized information is erased, including your settings, passwords, and contacts. In addition, any files that you have stored on your phone are also deleted.

This can be a great way to start fresh if you’re having trouble with your phone (like getting unstuck from the Apple logo) or if you’ve just gotten a new one. It’s also a good way to erase all of your personal data if you’re planning to sell or give away your phone.

To reset your iPhone XR settings:

1. Open the Settings app on your iPhone.

2. Scroll down and tap General.

3. Tap Reset.

4. Tap Reset all settings.

5. Enter your passcode if prompted.

6. Tap Reset all settings again to confirm.

After following these 6 steps for resetting your iPhone XR, your device should reboot automatically when the reset is complete. At that point it will load up the default settings and options. You will have to go through the process all over again up setting up your iPhone. Choosing the language, setting up your Bluetooth, and Wi-Fi settings etc.

DFU Mode

Another way to reset your device is to put it into DFU mode. DFU mode stands for Device Firmware Update and it allows you to update the firmware on your device or restore it from a previous backup.

To enter DFU mode, connect your device to a computer and open iTunes. Then, press and hold both the Side button and Volume Down button simultaneously for at least 10 seconds, until you see the screen go black.

Once the screen is black, press and hold both the Side button and Volume Up button simultaneously for 5 seconds. You should see the message “iTunes has detected an iPhone in recovery mode.” If you see this message, you have successfully entered DFU mode.

Here is the step by step:

  1. Plug your iPhone XR into the computerā€™s USB port with the Apple-supplied Lightning cable or USB cable.
  2. While your device is connected, quickly press and release theĀ Volume Up button, then quickly press and release theĀ Volume Down button.
  3. Then press and hold theĀ Side/Power buttonĀ until the screen turns completely black.
  4. As soon as your iPhone screen turns black, press and hold theĀ Volume Down buttonĀ while continuing to hold theĀ Side/Power button.
  5. After 5 seconds, let go of theĀ Side/Power buttonĀ but keep holding down theĀ Volume Down buttonĀ until your iPhone shows up in iTunes.
  6. Release theĀ Volume Down buttonĀ as soon as it appears in iTunes. Your device should now be in DFU mode.

From here you should be able to follow the rest of the on screen prompts.

Factory Reset

Factory resetting an iPhone deletes all data stored on the device, including personal information.

If you are experiencing major data corruption that is causing fatal system errors on your iPhone, a factory reset may be the only way to fix the issue.

Keep in mind that this will erase all data from the phone, so make sure to back up any important files before you proceed.

Factory resetting an iPhone XR is a fairly straightforward process.

To begin, hold down the Volume Up button and then release it.

Next, hold down the Power button until you see the Apple logo appear.

Finally, release the Power button and continue to hold down the Volume Up button until you see the recovery mode screen.

From there, you can use the Volume buttons to navigate and select “Wipe data/factory reset” using the Power button to confirm your choice. Once that’s completed, select “Reboot system now” and your phone will restart.

Immediately after your iPhone starts back up again, you can continue with the initial setup and start brand new again.

Use iTunes to Restore your iPhone

When you restore an iPhone using iTunes, you are essentially returning the device to its factory settings. This means that all of the data on the phone is erased and replaced with the default settings and content that was included when the phone left the factory. There are a few reasons why you might want to restore your iPhone XR using iTunes.

One reason might be if you are experiencing technical problems with your phone and want to start fresh by erasing all of the data and settings. Another reason might be if you are selling or giving away your phone and want to make sure that all of your personal data is removed before handing it over to the new owner.

Finally, restoring an iPhone using iTunes can also be a way to update the device’s software if a newer version is available.

To restore your iPhone using iTunes, you will need to have a computer with the latest version of iTunes installed. If you don’t have the latest version, you can download it for free from Apple’s website. Once you have iTunes installed, open it and connect your iPhone to your computer using the USB cable that came with your phone.

Once your iPhone is connected, click on the “iPhone” icon in the top left corner of iTunes, and then click on the “Summary” tab. Under “Backup”, make sure that “This computer” is selected and that “Encrypt iPhone backup” is not checked. Then click on the “Restore iPhone” button and follow the onscreen instructions.

iTunes will first restore your iPhone to its original factory settings, and then it will install the latest version of iOS. During this process, your iPhone will be completely erased and all of your data will be lost. Make sure that you have a backup of your data before restoring your iPhone using iTunes.

Restoring your iPhone with iTunes can be a long process, so it’s important to be patient and let it finish. Once the restore is complete, you’ll need to sync your iPhone with your computer.

Make sure that your computer is authorized to sync with your iPhone – if it’s not, you’ll need to enter your Apple ID and password. Once the sync is finished, you can disconnect your iPhone.

Recovery Mode Restore

When your iPhone XR is in recovery mode, you can restore it from a backup or update its software. To do either of these things, you’ll need to connect your iPhone XR to a computer with iTunes installed. If you’re updating your iPhone XR’s software, you can also do it wirelessly.

When you connect your iPhone XR to a computer and open iTunes, you’ll see a message saying that your iPhone XR is in recovery mode and needs to be restored. If you click “Restore,” iTunes will erase all the data on your iPhone XR and install the latest version of iOS. If you click “Update,” iTunes will just install the latest version of iOS without erasing any data.

If you have a backup of your iPhone XR on your computer, you can restore it from that backup. To do this, click “Restore Backup” in iTunes. Then select the backup that you want to use and click “Restore.” This will erase all the data on your iPhone XR and replace it with the data from the backup.

To restore your iPhone in recovery mode, you will need to follow these steps:

1. Connect your iPhone XR to your computer using the USB cable.

2. Launch iTunes and select your device.

3. In the Summary panel, hold down the Option key (Mac) or the Shift key (Windows) and click the Restore button.

4. Select the firmware file that you want to install.

5. The restoration process will start and your iPhone will be restored to its factory settings.

For best results, do not unplug your device until the restore is complete. Otherwise you will have to restart the entire restore over again.

Repair iOS

There are a number of different software programs that claim to be able to repair errors on iPhones. It is important to do your research before choosing one, as some may not be as effective as others.

iOS management and repair software can be extremely helpful in fixing major system data corruption that might have prevented your iPhone XR from completing its boot-up routine.

There are a number of iPhone repair software programs available that can be downloaded to your computer.

Some of these programs include Appleā€™s iTunes, as well as Tenorshare ReiBoot, Dr. Fone – iOS System Recovery, and iMyFone D-Back. These programs allow you to connect your iPhone to your computer via USB cable and then follow the onscreen commands to repair your iPhone system.

The most common reason for needing to repair an iPhone system is when the device becomes unresponsive or frozen. In these cases, the iPhone repair software can help by restoring the device to its original state. The software can also be used to fix other issues such as a black screen, an unresponsive home button, or in your case an Apple logo that wonā€™t disappear.

Apple Support/Service

While we hope it doesn’t come down to this solution, it’s better than nothing.

When you take your phone into an Apple store for help, the technician will first ask what the problem is.

You may need to explain that your phone isn’t working properly, that your iPhone XR is stuck on the Apple logo. The technician will then try to help you fix the problem. If they can’t fix it, they may give you a new phone or tell you to come back later.

Leave a Comment