People Can’t Hear Me on My iPhone

Have you recently made a phone call and the person can’t hear you? Well, you’re not alone.

The iPhone has a notorious problem with its microphone. Many people have found that they cannot be heard by the person on the other end of a phone call, even if they are speaking directly into the microphone. This is a problem for many reasons.

First, it makes it difficult to have a conversation when you can’t be heard.

Second, it can be embarrassing if you are trying to talk to someone in a public place and they can’t hear you. The problem is caused by a design flaw in the iPhone’s microphone, which means that it is not always able to pick up sound properly.

This can be frustrating for users and it is something that Apple needs to address in future models of the iPhone.

Reasons People Can’t Hear Me on My iPhone

If people can’t hear you on iPhone or FaceTime calls, it’s likely that your microphones are blocked by dirt and lint. To clear the blockage and improve call quality, you’ll need to clean the microphones.

To clean your iPhone or FaceTime microphones, you will need a small, stiff-bristled brush, such as a toothbrush, and some isopropyl (rubbing) alcohol.

First, turn off your iPhone or iPad and remove the SIM card tray. If your device has a home button, use a cotton swab slightly dampened with alcohol to clean the area around the button.

Next, use the brush to clean out the dirt and lint from the microphone grills on the device. Be sure to get into all of the spaces between the grills. Finally, use a cotton swab slightly dampened with alcohol to clean the areas around the speakers.

Replace the SIM card tray and turn on your device. Test to see if you can now be heard on calls.

Damaged Microphone

If your iPhone microphone is damaged, this can also affect how well someone can hear you on the other end. If the person on the other end can still hear you but it isn’t entirely clear, this can still be due to a problem with your iPhones microphone.

Your mic not working properly can be the product of too much wear over the months and years of you using your iPhone. Usually, there’s no way to fix this, however, you can take this to the Apple repair store and see what they can do for you.

The same goes for Airpods, the mic on earphones can sometimes be faulty and cause people not to be able to hear you. If this is the problem, try conducting calls using your iPhone’s mic and see if people can hear you. If they can, then it looks like your earphones need to be replaced.

Dirty Microphone

The most common and likely reason for someone not being able to hear you during a call on your iPhone is the lint and the dirt particles that get clogged in the mic at the bottom of your iPhone.

You’ll need to clean it up in an appropriate way to get people to hear you again. You can do this by using an anti-static brush and lightly brushing the mic at the bottom left to get the lint off. Make sure to be gentle when doing this as it could damage your phone if done too harshly.

Audio is Being Transmitted Else Where

When you’re on a call and the other person can’t hear you, it’s possible that your audio is being routed somewhere else. This could be through headphones, or through a speakers mic. To check if this is the case, you need to make sure that neither headphones nor a Bluetooth device are connected.

If there is a device connected, then the mic on your iPhone might not be enabled and it’s possible it may not be receiving the sound you’re providing.

Glitch in the Software

There are many potential ways that a software glitch could cause people not to be able to hear you on your iPhone. One possibility is that there is a problem with the phone’s microphone. This could be caused by a software glitch, or it could be a hardware issue.

Another possibility is that there is a problem with the phone’s speaker. This could also be caused by a software glitch, or it could be a hardware issue.

Finally, it is also possible that there is a problem with the way that the iPhone is communicating with the network. This could be caused by a software glitch, or it could be a hardware issue.

Damaged/Broken Speaker

If a speaker is broken, it can cause people not being able to hear you on your iPhone. The broken speaker can cause the iPhone to not emit any sound, or it can distort the sound that is emitted. This can be a problem if you are trying to have a conversation with someone or if you are trying to listen to music or a podcast.

Your Microphone Isn’t On

Having your microphone setting off on iPhone would prevent people from hearing you on the phone because it would disable the microphone. This is a good way to protect your privacy if you don’t want other people to be able to hear what you’re saying.

It’s also a good way to conserve battery life, since the microphone uses a lot of power.

To turn on the microphone on an iPhone, go to Settings and then select Privacy. From there, select Microphone and then enable the switch next to the app you want to use the microphone with.

How to Test if Your iPhone Microphone Isn’t Working

There are a few ways to test if your iPhone microphone has stopped working.

One way is to use the Voice Memos app to record a voice memo. If you can’t hear yourself when you play back the recording, then the microphone is not working. Another way to test the microphone is to make a phone call and see if the other person can hear you.

If they can’t, then the microphone might be defective. You can also try using Siri to ask a question; if Siri can’t hear you, then the microphone might be defective.

If you couldn’t hear yourself, then callers won’t be able to hear you due to your microphone being broken. In this case, you need to contact Apple Support.

There are a few things that could be causing this problem: a physical issue with your microphone, dirt or debris blocking the microphone, or a software issue. If it’s a physical issue with your microphone, it will need to be replaced. If it’s dirt or debris blocking the microphone, you can try cleaning it out using a cotton swab.

In the event that it’s a software issue, updating your software could solve the problem.

Try Calling More Than One Person

When you call someone on your iPhone and they cannot hear you, it is important to test why that might be the case. There can be several reasons why someone cannot hear you when you are calling them on your iPhone.

One potential reason is that there might be an issue with your iPhone’s microphone. Another potential reason is that there might be an issue with the person’s phone or their phone’s settings.

By calling multiple people, you can test why people cannot hear you on your iPhone and determine which of these potential issues is causing the problem.

Test the Mic With Another iPhone

One way to test why people can’t hear you on your iPhone is to use another iPhone to test the microphone. This will help you determine if there is an issue with your microphone or with the other person’s phone.

Additionally, you can test different environments to see if the quality of your voice changes in different settings. By doing this, you can pinpoint the source of the problem and potentially fix it.

Ask Siri a Question

When you ask Siri a question, your iPhone is essentially performing a test to see if its microphone is working. By speaking into the microphone and asking Siri a question, you can check to see if the microphone is picking up your voice correctly.

If it is, Siri will respond to your question. If not, you may experience problems with Siri not being able to understand what you’re saying.

How to Get Your iPhone Microphone Working Again

There are a few things you can do if your iPhone’s microphone isn’t working.

First, check the settings to make sure that the microphone is turned on. To do this, go to Settings > Privacy > Microphone and make sure that the switch next to the app you’re using is turned on.

If it is turned on and your microphone is still not working, try restarting your iPhone by holding down the Sleep/Wake button and sliding to power off. Once your iPhone has restarted, turn it back on and try the app again.

If the microphone is still not working, try resetting your iPhone by going to Settings > General > Reset > Erase All Content and Settings. This will erase all of your data and settings, but it may fix the problem with your microphone.

Blow Compressed Air into the Microphone

The small hole at the bottom of your iPhone is where the microphone is located. The grill at the top on the front screen and the one behind the mic are also both locations for microphones.

All three of these microphones are probably filled with lint and dirt, which can be removed by blowing compressed air into them. This will push out the dirt that is stuck inside.

To blow compressed air into an iPhone microphone to remove lint and dirt:

1. Turn your iPhone off.

2. Hold down the Home button and the Sleep/Wake button at the same time until you see the Apple logo.

3. Release both buttons and hold down the Volume Down button until you see the ” slide to power off ” message.

4. Slide to power off .

5. Press and hold the Home button until your iPhone powers on.

6. Open your iPhone’s Settings app .

7. Tap General > Accessibility > Assistive Touch .

8. Toggle Assistive Touch on .

9. Press the AssistiveTouch icon .

10. Tap Device > More > Microphone .

11. Tap Cleaning .

12. Make sure that ” Blow compressed air into microphone ” is turned on, then tap Done .

13. Point your phone’s microphone towards the object you want to clean and press the Cleaning button on the AssistiveTouch menu .

Restart Your iPhone

If you are having trouble hearing the person you are speaking to on your iPhone, restarting your iPhone may help. This will clear out any temporary issues that may be causing the problem and allow you to speak clearly once again.

How to Restart an iPhone

There are a few ways to restart an iPhone. The first way is to hold down the power button on the top of the phone for a few seconds until a slider appears. Then, drag the slider to the right to turn off the phone. To turn it back on, hold down the power button until the Apple logo appears.

Another way to restart an iPhone is by pressing and holding both the Home button and the power button at the same time. After a few seconds, the phone will turn off. To turn it back on, press and hold both buttons again until the Apple logo appears.

Factory Reset Your iPhone

Factory resetting an iPhone can be a way to fix issues like hearing people on phone calls again. When you factory reset an iPhone, it will restore the device to its original factory settings.

This will erase all of the data on the device, including any apps that you have installed, and it will also reset the phone’s settings.

So, if there is a problem with the phone’s audio that is preventing you from being able to hear people on phone calls, then doing a factory reset could fix that issue.

However, it is important to note that doing a factory reset will also erase all of your data, including any photos or videos that you have saved on the device.

Factory resetting an iPhone will erase all the data on the device and return it to its factory default settings.

To factory reset an iPhone, you will need to:

1. Back up your iPhone’s data to iCloud or to your computer.

2. Go to Settings > General > Reset and tap “Erase All Content and Settings.”

3. Enter your Apple ID and password when prompted.

4. Tap “Erase iPhone” to confirm.

The iPhone will then be factory reset and returned to its original state, with all of your data erased.

Allow Microphone Access on All Apps

When you give an app access to your microphone on your iPhone, it can allow people to hear you on phone calls again. This is because the app can use the microphone to listen in on your conversations.

This could potentially be a privacy issue, as it could allow others to hear your conversations without your knowledge.

It is important to be aware of which apps have access to your microphone, and to revoke access if necessary.

How to Give Apps Microphone Access

One way to give an app microphone access on your iPhone is to go to Settings > Privacy > Microphone and then enable the switch for the app you want to use.

You can also allow microphone access on an app-by-app basis by going into the Settings for that app and enabling the microphone switch there.

Note that some apps, such as FaceTime, will always have access to the microphone regardless of your settings.

Remove Your iPhone Case

If you have an iPhone 6 or earlier, removing the case on your phone could allow people to hear you on phone calls again.

This is because the microphone is located on the bottom of the phone, and when the phone is in a case, the microphone is covered.

Removing the case will allow the microphone to pick up your voice better.

Reset iPhone Network Settings

If you’re having trouble hearing people on your iPhone calls, one possible solution is to reset your network settings. This will erase all of your current network settings and preferences, and could potentially fix the issue.

To reset your network settings, go to Settings > General > Reset > Reset Network Settings. Keep in mind that this will also reset any VPN or Wi-Fi settings that you have saved, so you’ll need to set them up again after the reset is complete.

Update iOS Software

iOS is the software that runs on the iPhone. Updating to the latest version of iOS can fix problems like this one, where people are unable to hear you during phone calls.

This is because the latest version of iOS includes bug fixes and improvements that can help resolve these types of issues.

Contact Apple Support

When you contact Apple support on your iPhone, you may be able to have the issue with people being able to hear you on phone calls resolved. This is because by contacting Apple support, you can gain access to various resources that may help you fix the issue.

For example, Apple support may be able to help you troubleshoot the problem or provide a solution.

Additionally, by contacting Apple support, you can communicate with other individuals who may have had similar issues and received a resolution.

This can help you learn more about potential solutions and how to implement them.

Conclusion

The iPhone has a notorious problem with its microphone. Numerous users have complained about not being able to hear people on the other end of a call, or not being able to be heard themselves.

The problem seems to be with the placement of the microphone, which is located on the bottom of the phone. This makes it difficult to hold the phone up to your ear in a traditional manner, as it blocks the microphone’s sound input.

In addition, when you are using the phone in landscape mode, the microphone is facing away from you, making it even more difficult to be heard.

You May Also Like:

Can You Remove a Hacker from iPhone?

Why Did My iPhone Flashlight Stop Working?

Add Apple Airpods to Find My iPhone

Why Does My iPhone Keep Restarting?

Similar Posts:

Leave a Comment