One possible reason your new iPhone might not be turning on is if the battery is completely drained. If the device has been completely discharged, it may take a while for the battery to recharge and for the phone to start up again. If you’ve recently been using your phone a lot and the battery has been draining quickly, it’s possible that the battery is simply worn out and needs to be replaced.
Another possibility is that there’s a problem with the phone’s hardware. If you’ve dropped your phone, gotten it wet, or otherwise damaged it, that could cause the phone to not turn on. There could also be a problem with the phone’s logic board or with its connection to the battery. If you think there might be a hardware issue with your phone, it’s best to take it to an Apple technician for repair.
Common Reasons Why your iPhone Won’t Turn On
When an iPhone won’t turn on, there are a few potential causes. First, it could be a hardware issue, in which case the phone will need to be repaired or replaced.
Second, it could be a software issue, which can often be resolved by restarting the phone or resetting its settings.
Third, it could be due to a battery problem, in which case the phone may need to be charged for longer or have its battery replaced. Finally, it could simply be that the phone is turned off and needs to be turned on again.
If you’re not sure what’s causing your iPhone to not turn on, try each of these potential solutions one by one until the problem is resolved.
However, if by now your iPhone is still not turning on, not too worry as we will offer more in-depth solutions below.
Charge Your iPhone
Charging your iPhone is the first step in trying to fix any battery issues. Make sure that you are using the correct charging cord and plugging the cord into an outlet. If your iPhone still will not turn on, try a different outlet. If your iPhone still will not turn on, it may be time to take it in for repair.
When an iPhone’s battery is draining quickly, one potential solution is to connect the device to its charger and let it charge for at least 30 minutes. This gives the device time to accumulate enough power to potentially fix the issue.
Some factors that can cause rapid battery drain on an iPhone include a faulty battery, apps that use a lot of power, or a bad software update.
When using a charger other than the original, it is important to ensure that the desired power output is obtained in order to avoid damaging the device. After a certain amount of time has passed, try turning on the iPhone to see if it works. If it does, then there are other factors at play that need to be addressed.
By specifically mentioning keywords such as “partially-resolved” and “other factors,” this content provides useful instructions for resolving the issue at hand.
New iOS Feature – BatteryUsage
iOS 11.3 introduced a new feature that allows users to see which apps are draining their battery the most. This can be found in the Battery section of the Settings app. To see this information, select BatteryUsage from the menu.
The first section, BatteryUsage by App, shows you how much power each app has consumed since the last full charge. The second section, BatteryUsage since Last Full Charge, shows you how much power each app has consumed since you last turned on your iPhone.
You can tap on any of the apps listed to see more information about that app’s battery usage. For example, if you tap on Facebook, you’ll see how much time Facebook has spent running in the background and how much power it has used overall.
If an app is using more power than you’d like it to, there are a few things you can do:
Restart your iPhone: This will clear out any background processes that might be using up battery life.
Turn off Background App Refresh: This will stop apps from refreshing in the background. You can find this setting under General > Background App Refresh.
Turn off Location Services: This will stop your phone from constantly trying to find your exact location and prevent your battery from draining.
Force Restart Your iPhone
If your iPhone has battery power but then suddenly turns off and won’t turn back on, it’s likely that the phone is still turned on but stuck on a black screen. This means to you that your device isn’t turning back on.
Rogue apps can cause a system file to become corrupted, which will result in the system failing to start. Rogue apps are usually installed without the user’s knowledge or consent, and they can be very difficult to remove.
They often perform malicious activities such as collecting personal information or bombarding the user with ads.
There are a few potential solutions to iOS devices that are stuck on a black screen. The first and simplest solution is a forced restart. This can be done by pressing and holding the power button and the home button at the same time until the device restarts. If this doesn’t work, another possible solution is to try restoring the device using iTunes.
To restart a stuck or unresponsive iPhone, you can use this alternative method. This abrupt kill of all erratic apps will fix corrupt services that have caused the iPhone system to crash. It is a more effective solution than restarting or soft resetting your iPhone.
There are a few things you can try if your iPhone is stuck on a black screen:
-Try holding down the power button and the home button at the same time for about 10 seconds. This will force your iPhone to restart.
-If that doesn’t work, try plugging your iPhone into your computer and restoring it using iTunes.
-If you have an iPhone 8 or newer, you can try hard resetting your phone by pressing and holding the volume up button and the power button at the same time for about 10 seconds.
For iPhone 8 users and older versions, try this:
1. Hold down the Sleep/Wake button and the Volume Down button together for about ten seconds until the Apple logo appears.
2. Release both buttons and wait for the device to start up again.
3. If needed, you can hold down the Sleep/Wake button again to turn off the iPhone 7.
Press and hold the Volume Down button and the Power (Sleep/Wake) button simultaneously and then release both buttons with the Apple logo appears.
For iPhone 6 users and older versions, try this:
Restarting your iPhone 6 is a quick and easy way to clear out its memory and fix any small glitches. If your phone is acting up or you just need to free up some space, follow these simple steps to restart it:
1. Hold down the power button until “slide to power off” appears on the screen.
2. Slide the power button to the right to turn off your phone.
3. Hold down the power button again until the Apple logo appears.
4. Let go of the power button and wait for your phone to start up normally.
No Need For Backups
Creating backups of your device is always a good idea, especially if you plan on making changes to your system. However, the procedures detailed above do not affect any saved information in the internal memory of your phone, so no backups are necessary. This means that you can safely install a new ROM or kernel without worrying about losing any data.
Plug Your iPhone into a Computer
If your iPhone still refuses to power on, you can try using iTunes on a computer. To do this, you will need to connect your iPhone to the computer using the supplied USB cable or Lightning cable. Once it’s connected, open iTunes on the computer.
Normally, after a few seconds, iTunes should be able to recognize and sync with your iPhone. However, if that is not the case, close any computer programs you’ve left opened or running in the background or disable any security software like antivirus and firewall on your computer. After that, retry syncing your device.
If you are experiencing a boot-up system failure on your iPhone, you may be able to fix the issue by forcing the device to restart and entering recovery mode. Recovery mode can be entered in different ways, depending on which iPhone variant you have.
If iTunes is able to sync with your iPhone, force it to restart but this time let it enter recovery mode so you can use iTunes to repair any corrupt system files that caused the boot-up system to fail.
Once your iPhone is connected to iTunes, you may see a message that says “There is a problem with the iPhone that requires it to be updated or restored.” If this happens, click on the “Update” button. This will download the latest software for your phone and may fix the issue. If it doesn’t, click on the “Restore” button. This will erase all of the data on your phone and install a new copy of iOS.
How to Enter Recovery Mode
There are a few different ways that you can enter recovery mode on your iPhone 8 or later.
Enter recovery mode on iPhone 8 or later models:
One way is to do it directly from your device. To do this, simply power off your iPhone and then connect it to your computer while holding down the Volume Down button.
Once you see the Connect to iTunes screen, you can release the Volume Down button and then follow the instructions on your screen to enter recovery mode.
Enter recovery mode on iPhone 7 or earlier models:
To enter recovery mode on an iPhone 7 or earlier, you will need to connect the device to a computer and use iTunes.
First, make sure that your computer is up to date and has the latest version of iTunes installed.
Next, connect your iPhone to your computer using the USB cable.
If iTunes doesn’t open automatically, open it manually.
In the top left corner of iTunes, you should see an image of an iPhone with a cable connected to it. Click on this image.
A list of options should appear. Click on the “Restore” button.
iTunes will then ask you to confirm that you want to restore your iPhone. Click on the “Restore” button again to continue.
Your iPhone will then be restored to its factory settings and you will lose all data stored on it.
What to do After Entering Recovery Mode
iTunes commands and controls
1. To repair iOS using iTunes, you first need to open the program on your computer. Once it is open, you will see a menu bar at the top with various options. Click on the “Device” button and then select “Summary.”
2. In the Summary window, you will see information about your device such as its name, version number, and serial number. Under the “Repair” tab, you will see two buttons: “Check for Update” and “Restore.”
3. If you want to update your device to the latest version of iOS available, click on the “Check for Update” button. If an update is available, iTunes will download it and install it automatically.
4. If you want to restore your device to its original factory settings, click on the “Restore” button. This will erase all data from your device and restore it to its original state. Be sure to back up your data before restoring your device!
Another way to enter recovery mode is by using Apple’s Recovery Mode tool. This is a utility that allows you to put your device into recovery mode without having to use a computer. To use this tool, simply download it from Apple’s website and then follow the instructions on your screen.
If you’re having trouble entering recovery mode, or if you’re not sure how to do it, you can always contact Apple support for help.
Repair/Restore Your iPhone Using iTunes DFU Mode
If your iPhone is not working correctly, you may try putting it in recovery mode or DFU mode to fix the issue. Recovery Mode restores the device to its original factory settings, while DFU Mode updates the firmware on the device without loading iOS.
DFU mode is a state that you can put your iPhone into where it can interface with iTunes but does not load the iPhone operating system or boot loader. This can be very helpful when you are trying to update or restore your iPhone.
When performing a factory reset, all of the data on the iPhone will be erased. This includes any installed apps, as well as any saved files or settings. The phone will effectively be returned to its “out-of-the-box” state. For this reason, it’s important to make sure that any important data is backed up before proceeding with a factory reset.
How to Enter DFU Mode
iPhone 7 and earlier iPhone models:
1. Connect your iPhone to your computer using the USB cable.
2.Launch iTunes on your computer.
3. Turn off your iPhone by pressing and holding the Power button until the Slide to power off slider appears, then slide the slider.
4. Press and hold the Power button for 3 seconds.
5. While still holding the Power button, press and hold the Home button for 10 seconds.
6. Release both buttons and wait for iTunes to say “iTunes has detected an iPhone in recovery mode.”
7. If iTunes doesn’t recognize your iPhone, force restart it by pressing and holding the Power and Home buttons until you see the Apple logo.
8. After your iPhone has been recognized in DFU mode, Restore it using iTunes by clicking on the device’s name in the left-hand sidebar of iTunes and then clicking on the Restore button in the main window.
iPhone 8 and later iPhone models:
1. Connect your iPhone to your computer using a Lightning cable.
2. Open iTunes on your computer.
3. Press and hold the Sleep/Wake button and the Volume Down button at the same time for 8 seconds, or until you see the power-off slider.
4. Drag the slider to turn off your iPhone.
5. Press and hold the Sleep/Wake button for 3 seconds.
6. Press and hold the Volume Down button while still holding the Sleep/Wake button for 10 seconds, or until you see the Connect to iTunes screen.
7. When you see this screen, release both buttons. Your iPhone is now in DFU mode and should be recognized by iTunes.
If you’re seeing the Apple logo, it means that you’ve held down the Sleep/Wake button for too long and will have to start all over from beginning.
If your iPhone is stuck in DFU mode, you will see a black screen. In order to fix this, you need to connect your iPhone to iTunes. Once it is connected, you will need to restore your iPhone.
When you connect your iPhone to iTunes, it will display a message indicating that your phone is in recovery mode. If you follow the onscreen instructions from there, iTunes can help restore your device.
After you’ve restored your iPhone from a backup, you should exit DFU mode and allow your apps to recalibrate.
My iPhone Still isn’t Turning On
One possible issue that might prevent your iPhone from turning on is a faulty battery. If your iPhone is still under warranty, you can take it to an Apple service center and have the battery replaced.
However, if your iPhone is out of warranty, you can either replace the battery yourself or take it to an unauthorized technician who can do it for you.
There’s a higher chance that your device has obtained some sort of physical or liquid damage if it’s not working properly. This type of damage usually requires service from a professional. If you’re having trouble with your device, your best bet is to contact Apple Support for further assistance.
You May Also Like:
iPhone X Not Sending Text Messages
How to Block No Caller ID on iPhone
How to Screenshot on iPhone 11
- How To Get Iphone Out Of Recovery Mode Ios 10?
- How To Put Iphone 6 In Recovery Mode?
- How To Turn On Power Saving Mode Iphone?
- How To Disable Low Battery Warning On Iphone?
- How To Restore Iphone Without A Computer?
- How To Get Battery Percentage On Iphone Xr?
- How To Reset Iphone 6 Plus When Disabled?
- How To Reset Iphone 6 Plus When Disabled?
- How To Reset Iphone 5s Without Computer?
- How To Unlock A Disabled Iphone 5c?